Application:1. Fast, easy replacement of broken shaft hangers.2. Sturdy and durable components for new and old greenhouses.3. Designed to fit most greenhouses, it can also be customized on demand.Benefits:• Less labor on repairs. No need to dismantle the shaft, our unique hangers are assembled around it - it’s a one-man job!• Adds flexibility to the construction of new systems in existing and new buildings.• Extends the life of other related parts (motors, drive pipes, structure stability) due to the specially formulated inner plastic ring which serves as bearing support and holds the drive line in its optimal position.• A better alternative to a standard support plate and other shaft hangers.• Makes complicated drive line repairs easy!

The pillow block with a double-shell stamped metal bracket works as a support point for 34 mm drive shafts for ventilation- and shading-systems in greenhouses. The pillow block has mounting holes for M8 bolts.Thanks to its double-shell construction the ball bearing within the bracket can be replaced, if needed. The product can be delivered with a usual ball bearing SB 207 (24000101) or with a ball bearing with a longer inner ring UB 207 (24000101).Material: Galvanized steel (housing & bearing)

This steel tube is particular stable. It is used as a push-pull-tube for shading- and ventilation systems in greenhouses. The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt and nut 27.32 for steel tubes are needed.Diameter: 32 mm Wall thickness: 1.5 mm Length: 6500 mm Material: Galvanized Steel

Mounting height: Lower edge to middle of drive shaft 77 mmRidder Art.-Nr.: 503095

These tube connector halves are used for reliable connection of 34 mm steel tubes for drive shafts. Compared to heat-welded connection our tube connector halves offer higher stability and durability. The connector halves are bolted to the steel tubes with the included M8x50 bolts. Material: Steel, galvanized

This steel tube is used as a drive shaft for ventilation systems and large shading systems in greenhouses.Due to its wall-thickness of 2,50 mm, it is resistant against torsion.The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt M8 x 50 with a nyloc nut M8 are neededDiameter: 1 Wall thickness: 2.5 mmLength: 6500 mmMaterial: Galvanised Steel

This steel tube is used as a drive shaft in shading and ventilation systems in large greenhouses. Due to its wall thickness of 3.25 mm, it is very resistant against torsion. The tube connector halves within our product range are used to connect the tubes. Diameter: 33.5 mm Wall thickness: 3,25 mm Length: 6050 mm Material: Steel, galvanized

Das ideale Rollschirmrohr für Single-Rollschirme. Es ist ausgestattet mit einer Nut zum Einführen des Gewebes.Material: Aluminium

This steel tube is particular stable. It is used as a push-pull-tube for shading- and ventilation systems in greenhouses. The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt and nut 27.32 for steel tubes are needed.Diameter: 27 mm Wall thickness: 1.5 mm Length: 6500 mm Material: Galvanized Steel

Universal joint for attaching 5/4" tubular drive shafts to each other by welding

Our film clips are used in roll up screens for fixing film and fabrics onto 27 mm steel tubes, that can be alternative to aluminium grooved ones.The clips are made of plastic, which is friendly to any component of roll up screens.

The shaft hanger repair set enables you to replace broken shaft hangers quickly and easily. You will profit from less labour for the repair as you don't have to dismantle the shaft - our unique hangers are assambled around it. The shaft hanger repair set also extends the life of other related parts (motors, drive pipes, structure stability), due to the speciallyformulated inner plastic ring, which serves as bearing support and holds the drive line in its optimal position.It is designed to fit most greenhouse types, and can be customized on demand. The sturdy and durable components of this set can also be used in new and old greenhouses, where they will add flexibility of the system.

This high quality support plate from TGU works as a bearing for 34 mm drive shafts in ventilation systems in greenhouses. It has straight mounting holes. This support plate is especially durable even under heavy weights thanks to a slide bearing, which is fitted with a special plastic ring. This bearing offers perfect slide effects and works as a substitute for grease. Material: Galvanized steelMounting height: Lower edge to middle of drive shaft 67 mm

The support plate works as a bearing for 42 mm drive shafts in greenhouses. It is equipped with straight mounting holes. Thanks to built-in slide bearing, which is constructed with a centred bronze ring, this support plate is very durable and suitable for applications under heavy weights. In addition this slide bearing functions as a substitute for grease. Material: Galvanized steelMounting height: Lower edge to middle of drive shaft 55 mmRidder Art.-Nr.: 503200

Our purlin clips are used to attach a roll-up fabric to purlins in greenhouses.Material: Stainless steel

This adapter is inserted in telescopic system to connect built-in U-joint and the steel tubes. The extended version allows to use a spacing roller like it is used, for example, in TGU TransAxle Unit.It fits 27 mm tubes with a wall thickness of 1,5 mm.It is a perfect solution for TGU TransAxle Unit as well as for single and double U-joints. Material: Galvanized steel

This adapter gets inserted in roll up screen systems in between the gear motor RW 45 and a 50 mm roll up tube. It specially fits the TGU Tower Roller Plus System.Material: Milled aluminium

This adapter is inserted in telescopic system to connect built-in U-joint and the steel tubes. The extended version allows to use a spacing roller like it is used,for example, TGU TransAxle Unit.It fits 32 mm tubes with a wall thickness of 1,5 mm.It is a perfect solution for TGU TransAxle Unit as well as for single and double U-joints. Material: Galvanized steel

The perfect tube for twin roll-up screens. It is equipped with two notches for inserting the shade cloth. Material: Aluminum