The clip profile protects ?loth overhangs in shading systems in greenhouses.It is clipped directly onto the tensioned coated cable to prevent screens rubbing against the wire.Material: PVC

The pinion house unit TU 6-30 works as a drive for racks 30 in greenhouse ventilations. A counter roller enables reliable and gentle guidance of the rack. Therefore you will profit from low abrasion of your ventilation system.Thanks to a centred bronze ring, that works as a bearing, the pinion house unit especially fits simple and light-weight ventilation systems. For drives with 34 mm steel tubes. Material: Steel housing with a plastic bearing Ridder Art.-Nr.: 500018

The window bracket help to fix racks to the ventilation flap in greenhouse ventilations. The included Inox M6-bolt fixes the rack reliably into the connector. To fix the bracket to the ventilation flap, two further M& bolts are needed. These are not included.Material: aluminium pressure-castingRidder Art.-Nr.: 500021

The pillow block with a double-shell stamped metal bracket works as a support point for 34 mm drive shafts for ventilation- and shading-systems in greenhouses. The pillow block has mounting holes for M8 bolts.Thanks to its double-shell construction the ball bearing within the bracket can be replaced, if needed. The product can be delivered with a usual ball bearing SB 207 (24000101) or with a ball bearing with a longer inner ring UB 207 (24000101).Material: Galvanized steel (housing & bearing)

This rack is especially suitable for standard ventilation in all types of greenhouses.The end piece of the rack has no teeth. This enables a security stop as soon as the vent has opened to the maximum. It also stops the rack from getting pushed out. The rack is precisely fitted to the pinion housing TU 11:22 & 30 and therefore very durable. The product can be delivered in several lengths. Height of the teeth: 30 mmMaterial: galvanized steelRidder Art.-Nr.: 418546

This steel tube is particular stable. It is used as a push-pull-tube for shading- and ventilation systems in greenhouses. The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt and nut 27.32 for steel tubes are needed.Diameter: 32 mm Wall thickness: 1.5 mm Length: 6500 mm Material: Galvanized Steel

Professional rack grease for maintenance of racks in ventilation and shading systems in greenhouses. Annual greasing ensures long-term, trouble-free operation of the rack drives.The grease can be applied to the racks with a brush.The grease comes in a cartridge and is compatible with 400 g-grease guns.

Mounting height: Lower edge to middle of drive shaft 77 mmRidder Art.-Nr.: 503095

Swivel pulley made of high impact resistant plastic with one rotatable and one fixed mounting eye. This model allows cable to go through the housing.This pulley has no ball bearing.

The diabolo roll set 1 serves as a guide for push tubes in shading systems with push-pull tube drives. Within this set the roll is built into an iron sheet housing.Material:Diabolo roll: PlasticHousing: Iron Sheet

This rack is especially suitable for light-weight ventilation in poly tunnels and -greenhouses. The end piece of the rack has no teeth. This enables a security stop as soon as the vent has opened to the maximum. It also stops the rack from getting pushed out. The rack is precisely fitted to the pinion housing TU 11:22 & 30 and therefore very durable. The product can be delivered in several lengths. Height of the teeth: 22 mmMaterial: galvanized steelRidder Art.-Nr.: 418095

Ridder Art.-Nr. 501094

Chain coupling connects motor gearbox chain wheel with a drive shaft and provides higher flexibility of the driving system.The coupling is equipped with a pre punched receptacle for the drive shaft, in which it can be easily inserted. The mounter benefits from an easier and quicker mounting compared to the usual welding. The duplex chain of this coupling enables the drive shaft to move in the line. Such a structure creates the higher flexibility of this drive system during dynamic external influences and during movements within the greenhouse construction. Ridder Art.-Nr.: 590001

Hebegurtführungsrolle for 20mm straps

This steel tube is used as a drive shaft for ventilation systems and large shading systems in greenhouses.Due to its wall-thickness of 2,50 mm, it is resistant against torsion.The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt M8 x 50 with a nyloc nut M8 are neededDiameter: 1 Wall thickness: 2.5 mmLength: 6500 mmMaterial: Galvanised Steel

Ridder "connector set" for acks and push-pull tubes in shading systems.Suitable for 27 racks. Material: pressure casting galvanized - Ridder Art.-Nr.: 500208

Ridder Art.-Nr.: 182058

The diabolo roll set 2 serves as a guide for push tubes in shading systems with push-pull tube drives. In this set the roll is built in into an iron sheet housing and equipped with a lateral guide. The side disks align the push-pull tube. Material: Diabolo roll: PlasticMounting disks:

Ridder Art.-Nr.: 565020

A short handle for direct operating the manual drive. The handle is good for low installated manual drive.

The chain coupling connects an existing chain wheel at the gear motor with a drive shaft and help tos to create a more flexible drive system. The coupling gets heat sealed on top of the drive shaft. The double chain of this coupling enables the drive shaft to move in the line. This construction creates the higher flexibility of this drive system during dynamic external influences and during movements within the greenhouse construction. Material: Galvanized steelRidder Art.-Nr.: 590016

This steel tube is used as a drive shaft in shading and ventilation systems in large greenhouses. Due to its wall thickness of 3.25 mm, it is very resistant against torsion. The tube connector halves within our product range are used to connect the tubes. Diameter: 33.5 mm Wall thickness: 3,25 mm Length: 6050 mm Material: Steel, galvanized