Is used for the attachement of 2 mm aircraft wire. Material: Steel Galvanized

With these crints poly wire is attached securely to the support wire bracket universal and afterwards it gets bolted. Material: Steel, galvanized

Our compact wire tigthener is very helpful by installing wires in narrow areas of shading systems and other constructions. The tightener provides more stable position of your cables and wires ,than other tigthener do.(Fixing only M6)

With these crints poly wire is attached securely to the support wire bracket universal and afterwards it gets bolted. Material: Steel, galvanized

The vent pulley unit provides guided and controlled rolling-up of the ribbon in side ventilations with drop down fabrics. Thanks to the two-shell construction a later mounting in the installation is possible by attaching the pulley on both sides of the drive shaft with two hose clamps. Additonally it can be fixed onto the shaft with the included bolt. The vent pulley can be used for tubes with a diameter from 32 to 34 mm.Material: Plastic

This universal wire-tightener gets used for tightening of all cords and wires in shading systems and other constructions.

With the KST-cord

For automatically or manually operated drive systems to open and close side ventilation. The telescopic shaft is particularly suitable for operating in lightweight greenhouses such as poly greenhouses.Its stable aluminium housing in combination with the stainless steel piston rod ensures a maintenance-free and stable operation. It provides an extremely simple assembly owning to the reliable coupling with two flats. The Trans Axle Unit fits permanently mounted motors. Maximum driving range is of 34 °.

This adapter is inserted in telescopic system to connect built-in U-joint and the steel tubes. The extended version allows to use a spacing roller like it is used, for example, in TGU TransAxle Unit.It fits 27 mm tubes with a wall thickness of 1,5 mm.It is a perfect solution for TGU TransAxle Unit as well as for single and double U-joints. Material: Galvanized steel

This adapter gets inserted in roll up screen systems in between the gear motor RW 240 and a 63 mm roll up tube. It specially fits the TGU Tower Roller Plus System Material: Milled aluminium

This wire tensioner is due to its removable tensioning drum for the subsequent tightening of already installed wires and ropes. So do not have to be time consuming uninstalled and installed to loose wires and ropes.The tensioning drum can be used without installation effort into the case.Material: galvanized steel

For automatically or manually operated drive systems to open and close side ventilation. The telescopic shaft is particularly suitable for operating in lightweight greenhouses such as poly greenhouses.Its stable aluminium housing in combination with the stainless steel piston rod ensures a maintenance-free and stable operation. It provides an extremely simple assembly owning to the reliable coupling with two flats. The Trans Axle Unit fits permanently mounted motors. Maximum driving range is of 34 °.

This adapter gets inserted in telescopic systems in between the built-in U-joint and the steel tubes. It is suitable with 34 mm tubes with a wall thickness of 2,5 mm and 32 mm tubes with 1,5 mm wall thickness.It specially fits the TGU TransAxle Unit as well as single and double U-joints. Material: Galvanized steel

This can be used in roll up screen systems to connect the telescope and roll up screen tube.

This adapter is inserted in telescopic system to connect built-in U-joint and the steel tubes. The extended version allows to use a spacing roller like it is used,for example, TGU TransAxle Unit.It fits 32 mm tubes with a wall thickness of 1,5 mm.It is a perfect solution for TGU TransAxle Unit as well as for single and double U-joints. Material: Galvanized steel

This wire tightner enables quick and easy mounting of Inox-wire in suspended shading systems. The component was especially designed for the construction of suspended systems and therefor it offers a perfect mounting position for this function. After its attachment to the system the wire tightner is adjustable to the left and the right. Mounting requires a M 6x65 bolt. This is not delivered with the product. The wire tightner gets used in numerous additional application fields where cord and wire has to be strained.

This adapter is used in telescopic systems to connect built in U-joint and steel tubes. It fits 27 mm tubes with a wall thickness of 1,5 mm.It is a perfect solution for TGU TransAxle Unit as well as for single and double U-joints. Material: Galvanized steel