This Allen head bolt is used, for example, for fixing the drive cable to the lead edge cable clip.

These all-purpose T-bolts combined with an M6 nut are the perfect solution for bolting the slip joint to screen profiles in shading and ventilation systems. Material: Stainless steel

These all-purpose T-bolts combined with an M6 nut are the perfect solution for bolting the slip joint to screen profiles in shading and ventilation systems. Material: Stainless steel

This is the perfect bolt system for connecting push-pull tubes 27 and 32. Its advantage is that the head of the bolt as well as the nut are positioned flush with the tube. A collision with the housing of the diabolo rolls can be avoided. Material: Steel galvanized

An all-purpose fully threaded steel screw with hexagon head.Material: galvanized steel

Our caliper helps to measure young plants and shrubs and sort them by size quickly and easily. The caliper is made of plastic, that minimizes the risk of damage of the plants.

Teleskopstab mit Kunststoff Stockhaken fertig montiertPraktisches Werkzeug zum Heranholen entfernter Gegenstände wie beispielsweise BodentreppenHakenlänge inklusive Fassung: 76 mmBemaßungen des Teleskopstabs: Länge: 0,86 -1,45 m; Durchmesser: 24 mm

These s-hooks can be used to hang various wires and parts in greenhouses.Material: Galvanized steel

Neutral-curing, elastic 1-component silicone sealant with high resilience and good adhesion to many substrates such as Lexan double-skin sheets.It meets the requirements of DIN 18540 and DIN EN ISO 11600.Abrasion-resistant and streak-freeCompatible with paintsUncut, without foreign plasticisersTested according to ift guideline MO-01/1RAL-certified

Hose diverter reel with metal anchor and plastic guide.For guiding irrigation hoses through your gardenAlso suitable for solid groundTotal length: 57 cmLength of metal spike: 31 cmLength of the plastic guide: approx. 18 cmGuide your irrigation hose specifically around corners and obstacles. In addition, you protect hose and surroundings, such as flower beds and house corners, from annoying damage.The long metal spike and large hose deflection pulley provides stable and secure hose guidance even with very strong pulling forces. Where other hose deflection rollers fail, this hose guide is the optimal solution.

Our cable tensioner device works in combination with the included belt as a support for holding cables and wire during tightening. It can be used for manual tightening or with a tightening unit.The cable tensioner is suitable for wire ropes from a diameter of 1 mm up to a maximum diameter of 38 mm.Insert the belt into the eye of the cable tensioner device. Material: Galvanized Steel

Schlauchumlenkrolle mit Metallanker und KunststoffführungZur Führung von Bewässerungsschläuchen durch Ihren GartenAuch für feste Böden geeignetGesamtlänge: 57 cmLänge Metallspieß: 31 cmLänge der Kunststoffführung: ca. 18 cmFühren Sie Ihren Bewässerungsschlauch gezielt um Ecken und Hindernisse herum. Zusätzlich schützen Sie Schlauch und Umgebung, wie Beete und Hausecken, vor ärgerlichen Schäden.Der lange Metallspieß und die große Schlauchumlenkrolle sorgt auch bei sehr starken Zugkräften für eine stabile und sichere Schlauchführung. Wo andere Schlauchumlenkrollen versagen, ist diese Schlauchführung die optimale Lösung.

The special Bostitch staples minimize fabric-damages, which can be caused by stapling. 

Our Cable Dispenser is a reliable tool for quick and easy handling of wires and ropes. It facilitates torsion-free unwinding on cable reels. Wires or ropes do not tangle. It saves your time upon ?abling and protect your material. Cable dispenser 510 is suitable for reels up to 510 mm wide.Plastic rollers on the side are serving as spacers to prevent the cable reel from being bent with the side parts of the dispenser. Suits spools with diameter up to 500 mm and weight up to 150 kg. Dimensions-----:Mechanically attached rubber feet give the cable Dispenser a firm hold upon unwinding. Galvanized drums and powder coated side frames protect from corrosion. Special construction ensures maintenance free operation.Approx. 380 x 570 x 90 mm (L x B x H)Made in GermanyCa. 380 x 570 x 90 mm (L x B x H)Made in Germany

The Cable Unwinder Cable Caddy X is the ideal tool for unwinding wires and cables vertically on cable reels. This means that the cables do not twist on themselves. This saves extra effort when laying cables and protects the material from unnecessary damage.The vertical mode of use means that the Cable Caddy X cable unwinder can also be used with damaged cable reels without any problems.Compact design - secure standThanks to its sophisticated design, the CableCaddy X has a secure footing - even when unwinding larger cable reels or pulling the cable a little harderDimensions: 305 x 305 x 118 (mm)Ball bearing support rollersOur carrying rollers are particularly stable and durable, as these are equipped with one ball bearing on each side, which are firmly screwed to the base plate.These carrying rollers are used exclusively for the Cable Caddy X. Mechanically attached rubber feetThe rubber feet of our cable caddy are not glued, but mechanically attached.This ensures a firm grip at all times, even on slippery industrial floors.

Use these special Bostitch staples to minimize fabric-damages caused by stapling! You'll profit from an increased durability of the shade cloth and therefore of your shading system.

A suitable hot-bit for the Engel-Hot-knife.Type RS is the perfect model for cutting fabric spread on the ground.Type HSS is the perfect model for fabric which you hold in your hand during cutting.The hot-bit can be placed on the hot-knife quickly and easily.

The Engel-Hot-knife is a perfect tool for cutting any kind of woven or knitted fabric. Cutting is realized with a special hot-bit. It seals fabric edges upon cutting, thus avoiding fraying. Hot bits suitable for Engel-Hot Knife are available for your choice in our webshop.

An all-purpose fully threaded steel screw with hexagon head.Material: galvanized steel

Our Cable Dispenser is a reliable tool for quick and easy handling of wires and ropes. It facilitates torsion-free unwinding on cable reels. Wires or ropes do not tangle. It saves your time upon ?abling and protect your material. Cable dispenser 510 is suitable for reels up to 510 mm wide.Plastic rollers on the side are serving as spacers to prevent the cable reel from being bent with the side parts of the dispenser. Suits spools with diameter up to 500 mm and weight up to 150 kg. Dimensions-----:Mechanically attached rubber feet give the cable Dispenser a firm hold upon unwinding. Galvanized drums and powder coated side frames protect from corrosion. Special construction ensures maintenance free operation.Approx. 380 x 570 x 90 mm (L x B x H)Made in GermanyCa. 380 x 570 x 90 mm (L x B x H)Made in Germany

Our Cable Caddy Twin is the perfect solution for workshops, construction sites and companies, where you regularly should unwind cable reels of various widths. Thanks to the two-part design, the Cable Caddy Twin gives you maximum flexibility compared to one-part cable dispensers.Like the one-piece models Cable Caddy Twin simplifies and accelerates the unwinding of wires and ropes on reels. You avoid tangled wires and the subsequent loosening.We manufacture the Cable Caddy in Germany according to high quality standards providing it with some practical features: An unscrewable aluminium roll-up ramp supports you upon positioning the reels on the unwinder. Metal rods stabilize the cable dispenser while the reels are being unwound. We deliver the Cable Caddy with two rods with a length of 900 mm. Tilting of the cable dispenser is prevented by laterally attached rope pulleys. Rubber feet firmly hold the dispenser upon rolling and prevent slipping. The side parts and support rollers are galvanized and thus protected from corrosion. The side parts are aaaadditionally power coated.

A drill device twists together two wire ends to securely close sacks and other containers.