Ridder Art.-Nr. 501094

Chain coupling connects motor gearbox chain wheel with a drive shaft and provides higher flexibility of the driving system.The coupling is equipped with a pre punched receptacle for the drive shaft, in which it can be easily inserted. The mounter benefits from an easier and quicker mounting compared to the usual welding. The duplex chain of this coupling enables the drive shaft to move in the line. Such a structure creates the higher flexibility of this drive system during dynamic external influences and during movements within the greenhouse construction. Ridder Art.-Nr.: 590001

A TGU durable and robust tubular motor can be mounted onto 50 mm and 63 mm roll up tubes.The motor has a voltage of 230 V for European market. A variant of 120V for the American market is also available on request.The limit switches can be easily adjusted from the outside with an Allen key.The tubular motor is delivered with a 10x10 mounting bracket to be set onto the motor guide.

Ridder Art-Nr.: 550032

This mounting bracket carries the 10 x 10 mounting pin of the tube motor. Therefore it gets installed at the left or the right side of the motor guide - depending of the position of the tube motor.Material: Steel

The chain coupling connects an existing chain wheel at the gear motor with a drive shaft and help tos to create a more flexible drive system. The coupling gets heat sealed on top of the drive shaft. The double chain of this coupling enables the drive shaft to move in the line. This construction creates the higher flexibility of this drive system during dynamic external influences and during movements within the greenhouse construction. Material: Galvanized steelRidder Art.-Nr.: 590016

A short handle for direct operating the manual drive. The handle is good for low installated manual drive.

Ridder Art.-Nr.: 550180

Ridder Art.-Nr.: 502010

This manual gear perfectly fits the needs of smaller shading and ventilation systems. It is equipped with a coupling which can be directly bolted to the TGU telescopic shaft or another drive shaft. The drive gets delivered with a matching hand-crank. On your request this gear can be also delivered with an extended hand-crank or with a hook for drives that are placed very high and therefore can not be reached directly. Combined with our chain wheel even gears that are placed very high can be reached.

This manual gear perfectly fits the needs of smaller shading and ventilation systems. It is equipped with a coupling which can be directly bolted to the TGU telescopic shaft or another drive shaft. The drive gets delivered with a matching hand-crank. On your request this gear can be also delivered with an extended hand-crank or with a hook for drives that are placed very high and therefore can not be reached directly. Combined with our chain wheel even gears that are placed very high can be reached.

This mounting bracket carries the 10 x 10 mounting pin of the tube motor. Therefore it gets installed at the left or the right side of the motor guide - depending of the position of the tube motor.Material: Steel

Ridders' electronic gear motors for shading and ventilation systems have pre- installed chain wheels, which work as a receptacle for the chain coupling. Ridder Art.-Nr. 537200

    150 Nm    400 V 3~, 50 Hz    4,4 Umdrehungen/Minute    0,17 kW    0,90  AmpereExtrem leises, selbsthemmendes Doppel-Schneckengetriebe mit hoher Lebensdauer, wartungsfrei.Universelle Montage durch Standard-Befestigung (Füße abnehmbar) hinten oder optional seitlich links (symmetrisch)!Eingebauter Präzisions-Zahnradendschalter END 20 für 580 Wellenumdrehungen (Mikroschalter in cURus).Zur Verkabelung 7-adriges Kabel verwenden.

Ridder Art.-Nr. 417636

Adjusting switch is used to set up the end switches in tube motors RB 50 E+ and RB 120 E+.

50 Nm400 V 3~, 50 Hz5,6 Umdrehungen/Minute0,11 kW0,45 AmpereExtrem leises, selbsthemmendes Doppel-Schneckengetriebe mit hoher Lebensdauer, wartungsfrei.Universelle Montage durch Standard-Befestigung hinten oder optional seitlich links (symmetrisch)!Eingebauter Präzisions-Zahnradendschalter END 20 für 580 Wellenumdrehungen (Mikroschalter in cURus).Zur Verkabelung 7-adriges Kabel verwenden.

    250 Nm    400 V 3~, 50 Hz    4,4 Umdrehungen/Minute    0,30 kW    1,10 AmpereExtrem leises, selbsthemmendes Doppel-Schneckengetriebe mit hoher Lebensdauer, wartungsfrei.Universelle Montage durch Standard-Befestigung (Füße abnehmbar) hinten oder optional seitlich links (symmetrisch)!Eingebauter Präzisions-Zahnradendschalter END 20 für 580 Wellenumdrehungen (Mikroschalter in cURus).Zur Verkabelung 7-adriges Kabel verwenden.

Chain coupling connects motor gearbox chain wheel with a drive shaft and provides higher flexibility of the driving system.The coupling gets welded to drive shaft.The duplex chain of this coupling enables the drive shaft to move in the line. Such a structure creates the higher flexibility of this drive system during dynamic external influences and during movements within the greenhouse construction. Material: galvanized steelRidder Art.-Nr.: 590000

Ridder Art.-Nr. 413922

With this motor bracket, you can use an EWA10 or EWA12 motor for your ventilation drive in continuous ridge ventilations. very easily on IP supports.Screwing on the saves you tedious and dangerous welding work on the IP support. girder. It is only necessary to drill two holes through the motor bracket. Tolerances are compensated for by elongated holes in the motor bracket.

Ridder Art.-Nr.: 502040

    150 Nm    400 V 3~, 50 Hz    4,4 Umdrehungen/Minute    0,17 kW    0,90  AmpereExtrem leises, selbsthemmendes Doppel-Schneckengetriebe mit hoher Lebensdauer, wartungsfrei.Universelle Montage durch Standard-Befestigung (Füße abnehmbar) hinten oder optional seitlich links (symmetrisch)!Eingebauter Präzisions-Zahnradendschalter END 20 für 580 Wellenumdrehungen (Mikroschalter in cURus).Zur Verkabelung 7-adriges Kabel verwenden.

Ridder Art.-Nr.: 502020