Rack H40-3\L2941 mm \ Ridder RSD250 and TU21-40

Product information "Rack H40-3\L2941 mm \ Ridder RSD250 and TU21-40"

These Racks are used to move push-pull tubes in drives for shading systems. They are equipped with a perforation which is used to hold the coupling rack.

The racks are available in different lengths.

Material: galvanized steel

Ridder Art.-Nr.: 413949

Customers who buyed this item also buyed:

Ridder pinion house unit RSD 250-40/RR - PU = 12 pcs

The pinion house unit RSD 250-40 RR serves as a drive, which is placed underneath for push-pull shading systems. By standard it is equipped with mounting straps for truss on the right side. This position enables a very close mounting to the rack. On demand we are able to deliver the pinion house unit with straps on the left side or on both sides. Material: galvanized steel, pinions are hardend especially Ridder Art.-Nr.: 500280

Details

Pinion house unit Ridder TU21-40 - Ridder Art.-Nr.: 500040

The pinion house unit TU 21-40 is used as a direct drive for shading systems with push-pull tube drives. Material: galvanized steel, pinions are hardend especially

Details

$Coupling unit PH40\B27x1.5\ST - to connect rack PH 40-3 with push-pull tube d. 27 mm$

Coupling unit PH40\B27x1.5\ST - to connect rack PH 40-3 with push-pull tube d. 27 mm

Size Ø: 27

Ridder "connector set" for acks and push-pull tubes in shading systems.Suitable for 27 racks. Material: pressure casting galvanized - Ridder Art.-Nr.: 500208

Details

Grease waterproof 400 g - PU = 24 pcs

Professional rack grease for maintenance of racks in ventilation and shading systems in greenhouses. Annual greasing ensures long-term, trouble-free operation of the rack drives.The grease can be applied to the racks with a brush.The grease comes in a cartridge and is compatible with 400 g-grease guns.

Details