Aluminum tube for roll up curtains 50mm Type 2 L=6,40mm - 60 pcs/Bundle - 2 grooves

The splices are getting inserted into the roll-up tube. Aluminium rivets provide a reliable hold. The splices are compatible with aluminium tube 50 type I and II. Material: aluminium

The Tower Roller Plus Set is part of our Tower Roller Plus drive system, which features the following properties: Drive system for medium and large roller screens, as well as rollable side vents and room partitions. Suitable for system lengths up to 120 meters with an extremely narrow installation depth of approximately 80 mm. Reduced weight, assembly time, and costs. Extremely durable and almost maintenance-free, thanks to the high-strength plastic rollers and the standard anodized aluminum profile. Reduced risk of accidents due to completely integrated and covered counterweights and pulleys. Integrated cable routing with energy chain. Compatible with all common motors (counterweight is adjusted accordingly).

This rail is a guide for motor mount and counter-weight in Tower Roller Plus System. The counter-weight side of the rail is equipped with a slot for a plastic cover to be inserted as a protection from accidents. The guide rail can be attached very quickly into the Tower Roller System. It is very stable and perfectly suitable for roll-up screens.

<p>The Tower Roller Plus Set is part of our Tower Roller Plus drive system, which features the following properties:</p> <ul> <li>Drive system for medium and large roller screens, as well as rollable side vents and room partitions.</li> <li>Suitable for system lengths up to 120 meters with an extremely narrow installation depth of approximately 80 mm.</li> <li>Reduced weight, assembly time, and costs.</li> <li>Extremely durable and almost maintenance-free, thanks to the high-strength plastic rollers and the standard anodized aluminum profile.</li> <li>Reduced risk of accidents due to completely integrated and covered counterweights and pulleys.</li> <li>Integrated cable routing with energy chain.</li> <li>Compatible with all common motors (counterweight is adjusted accordingly).</li> </ul>

This steel tube is used as a drive shaft in shading and ventilation systems in large greenhouses. Due to its wall thickness of 3.25 mm, it is very resistant against torsion. The tube connector halves within our product range are used to connect the tubes. Diameter: 33.5 mm Wall thickness: 3,25 mm Length: 6050 mm Material: Steel, galvanized

Our compact wire tigthener is very helpful by installing wires in narrow areas of shading systems and other constructions. The tightener provides more stable position of your cables and wires ,than other tigthener do.(Fixing only M6)