Rack H40-3\L4147 mm \ Ridder RSD250 and TU21-40

Application: Coupling unit for connecting rack PH 40-3 to Ø 27 mm push-pull tubes in shading systems Material: Zinc die-cast, galvanized Rack compatibility: PH 40-3 Tube compatibility: Ø 27 mm push-pull tube Ridder Article No.: 500208 The Coupling unit PH40 B27x1.5 ST connects Ridder rack PH 40-3 to a 27 mm push-pull tube. Its galvanized zinc die-cast construction ensures durability and corrosion resistance in greenhouse drive systems.

Application area: Professional rack grease for treating racks in greenhouse ventilation and shading systems Usage: Annual maintenance with this grease ensures long-term, smooth operation of rack drives Application method: Can be applied to the racks using a brush Packaging: Supplied in a cartridge suitable for 400 g grease guns Packaging unit: 24 cartridges Rack grease 400 g is specially developed for maintaining racks in greenhouse systems. It provides optimal lubrication and extends the service life of rack drives. Thanks to its easy brush-on application, the grease can be distributed evenly across the rack surface. This product is ideal for professional use and helps maintain the efficiency and reliability of ventilation and shading systems.

Application: Gear reduction drive for push-pull shading systems Material: Galvanized steel with specially hardened pinions Mounting: Standard with mounting straps for trusses on the right side (left or both sides available on request) Benefit: Enables very close mounting to the greenhouse truss Packaging unit: 12 pieces Ridder Article No.: 500280 The Pinion Housing RSD 250-40/RR is a robust drive unit for push-pull shading systems. Its compact design allows for tight installation near the truss, and the hardened pinions ensure long-lasting performance. Available with custom mounting configurations upon request.

Application: Direct drive for shading systems with push-pull tube actuation Material: Galvanized steel Gear type: Specially hardened pinions Compatibility: Designed for use with Ridder racks H40-3 Mounting: For integration into greenhouse shading systems Ridder Article No.: 500040 The Pinion Housing TU21-40 is used as a direct drive unit in greenhouse shading systems with push-pull tubes. Its galvanized steel body and hardened pinions ensure long-lasting performance and precise motion control. Compatible with Ridder rack systems such as H40-3.

Application: Coupling unit for connecting rack PH 40-3 to Ø 27 mm push-pull tubes in shading systems Material: Zinc die-cast, galvanized Rack compatibility: PH 40-3 Tube compatibility: Ø 27 mm push-pull tube Ridder Article No.: 500208 The Coupling unit PH40 B27x1.5 ST connects Ridder rack PH 40-3 to a 27 mm push-pull tube. Its galvanized zinc die-cast construction ensures durability and corrosion resistance in greenhouse drive systems.

Application area: Professional rack grease for treating racks in greenhouse ventilation and shading systems Usage: Annual maintenance with this grease ensures long-term, smooth operation of rack drives Application method: Can be applied to the racks using a brush Packaging: Supplied in a cartridge suitable for 400 g grease guns Packaging unit: 24 cartridges Rack grease 400 g is specially developed for maintaining racks in greenhouse systems. It provides optimal lubrication and extends the service life of rack drives. Thanks to its easy brush-on application, the grease can be distributed evenly across the rack surface. This product is ideal for professional use and helps maintain the efficiency and reliability of ventilation and shading systems.

Application: Gear reduction drive for push-pull shading systems Material: Galvanized steel with specially hardened pinions Mounting: Standard with mounting straps for trusses on the right side (left or both sides available on request) Benefit: Enables very close mounting to the greenhouse truss Packaging unit: 12 pieces Ridder Article No.: 500280 The Pinion Housing RSD 250-40/RR is a robust drive unit for push-pull shading systems. Its compact design allows for tight installation near the truss, and the hardened pinions ensure long-lasting performance. Available with custom mounting configurations upon request.

Application: Direct drive for shading systems with push-pull tube actuation Material: Galvanized steel Gear type: Specially hardened pinions Compatibility: Designed for use with Ridder racks H40-3 Mounting: For integration into greenhouse shading systems Ridder Article No.: 500040 The Pinion Housing TU21-40 is used as a direct drive unit in greenhouse shading systems with push-pull tubes. Its galvanized steel body and hardened pinions ensure long-lasting performance and precise motion control. Compatible with Ridder rack systems such as H40-3.

Application: Coupling unit for connecting rack PH 40-3 to Ø 27 mm push-pull tubes in shading systems Material: Zinc die-cast, galvanized Rack compatibility: PH 40-3 Tube compatibility: Ø 27 mm push-pull tube Ridder Article No.: 500208 The Coupling unit PH40 B27x1.5 ST connects Ridder rack PH 40-3 to a 27 mm push-pull tube. Its galvanized zinc die-cast construction ensures durability and corrosion resistance in greenhouse drive systems.

Application area: Professional rack grease for treating racks in greenhouse ventilation and shading systems Usage: Annual maintenance with this grease ensures long-term, smooth operation of rack drives Application method: Can be applied to the racks using a brush Packaging: Supplied in a cartridge suitable for 400 g grease guns Packaging unit: 24 cartridges Rack grease 400 g is specially developed for maintaining racks in greenhouse systems. It provides optimal lubrication and extends the service life of rack drives. Thanks to its easy brush-on application, the grease can be distributed evenly across the rack surface. This product is ideal for professional use and helps maintain the efficiency and reliability of ventilation and shading systems.

Application: Gear reduction drive for push-pull shading systems Material: Galvanized steel with specially hardened pinions Mounting: Standard with mounting straps for trusses on the right side (left or both sides available on request) Benefit: Enables very close mounting to the greenhouse truss Packaging unit: 12 pieces Ridder Article No.: 500280 The Pinion Housing RSD 250-40/RR is a robust drive unit for push-pull shading systems. Its compact design allows for tight installation near the truss, and the hardened pinions ensure long-lasting performance. Available with custom mounting configurations upon request.

Application: Direct drive for shading systems with push-pull tube actuation Material: Galvanized steel Gear type: Specially hardened pinions Compatibility: Designed for use with Ridder racks H40-3 Mounting: For integration into greenhouse shading systems Ridder Article No.: 500040 The Pinion Housing TU21-40 is used as a direct drive unit in greenhouse shading systems with push-pull tubes. Its galvanized steel body and hardened pinions ensure long-lasting performance and precise motion control. Compatible with Ridder rack systems such as H40-3.