Adaptor for roll-up tube

Ridder Art.-Nr.: 550025

Ridder Art-Nr.: 550032

A TGU durable and robust tubular motor can be mounted onto 50 mm and 63 mm roll up tubes.The motor has a voltage of 230 V for European market. A variant of 120V for the American market is also available on request.The limit switches can be easily adjusted from the outside with an Allen key.The tubular motor is delivered with a 10x10 mounting bracket to be set onto the motor guide.

This steel tube is used as a drive shaft for ventilation systems and large shading systems in greenhouses.Due to its wall-thickness of 2,50 mm, it is resistant against torsion.The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt M8 x 50 with a nyloc nut M8 are neededDiameter: 1 Wall thickness: 2.5 mmLength: 6500 mmMaterial: Galvanised Steel

A TGU durable and robust tubular motor can be mounted onto 50 mm and 63 mm roll up tubes.The motor has a voltage of 230 V for European market. A variant of 120V for the American market is also available on request.The limit switches can be easily adjusted from the outside with an Allen key.The tubular motor is delivered with a 16x16 mounting bracket to be set onto the motor guide.

Ridder art-no. 550131

Ridder Art.-Nr.: 550180